产品描述:
1、八冷模组,产能大,生产效率高。
2、冷内外模温度可个别调整,适用各种不同材质之鞋面与内里的加温需求。
3、经预定型后之鞋后踵套完全与鞋面及内里粘合,不易脱离及内里完全拉平,提高鞋面品质,减少不良率。
4、鞋面机台设计操作简单方便。
5、夹具可做行程调整或选择不用,适用各种不同鞋型。
6、模具依客户鞋型定制,可获最准确定型效果。
7、特殊反面模可做不良品及再整形,消除皱纹及增加鞋口之美观。
8、环保之冷冻系统独特设计,效果高,冷却速度最快,正常运转10分钟内蒸发器内可达-20℃以下。
1、Four cooling and double heating mold group can make the yields greater and the productivity higher
2、The temperature of the outer molds can be adjusted , applying to the
demands for the heating of the vamps and the liners of different materials
3、The pre-shaped heel set can be glued with the vamps and the liner , which cannot be unglued easily . The liner can be completely leveled , to improve the quality of the vamp and reduce the rejection rate.
4、The design of the slant mahcine can make the operation easier and more convinient
5、The clamp can adjust the joutney or is not used , applying to the shoes of different shapes
6、The mold can be made according to the shoe shapes of the customers , which can reach the effects of obtaining the most accurate shapes.
7、Paticular obverse mold can be made to be rejects and re-adjusted type , to remove wrinkles and beautiful the shoe opening.
8、The environment protecting freezing system is designed uniquely , with hight efficiency and with the freezing quickest . During 10 minutes common running , the evaporator can reach over -20℃ degree.
型号 Model DS-8119
机械尺寸 Dimensions 1130*900*1600mm
电压 Voltage 220V1-:50/60HZ
气源 Air pressure 5-6kg/cm 2
耗电量 Power consumption 2.5kw
产量 Capacity 1400-2000Pairs/8Hours
净重 N.W 280kg
毛重 G.W 380kg